Custom PVC Pipe Extrusion Machine in China
Planning to start or upgrade your polyvinyl chloride pipe extrusion production line? Wecoex PVC pipe extrusion machines are complete systems with modular designs for convenient layout and installation. They can produce PVC pipes with 16mm to over 2000mm diameter while handling different PVC material grades such as UPVC and CPVC for any pipe extrusion requirements.








Professional PVC Pipe Extrusion Machine


Through Wecoex R&D, our engineers have designed highly efficient and cost-effective PVC pipe extrusion lines. From extruder, die, cooling tank, vacuum tank, printer, haul-off to cutter, we strive to make your PVC pipe extrusion process seamless with our complete turnkey solutions.
With modular designs in Wecoex PVC pipe making machines, we can choose parallel twin-screw, conical twin-screw, or single-screw extruders as per your raw material in powder status or granules status. Based on your specific requirements, you can configure the tooling die systems in our PVC machines to produce different polyvinyl chloride pipe profiles.
Our PVC pipe extruders can produce plain, corrugated, single-layer, or multi-layer polyvinyl chloride pipe pipes. The thickness may vary depending on your pressure rating and target market.
Whether you want additional auxiliary equipment like a socketing machine. pulverizer, crusher, and mixer or other functionalities like belling, chamfering and labeling, Wecoex is your no. 1 PVC extruder machine manufacturer in China.
Partner with Wecoex today for lifetime technical support and competitive PVC pipe machine prices – request a quote now.
PVC Pipe Extrusion Machine

PVC Pipe Extrusion Machine Specifications
Selecting the wrong PVC pipe extrusion machine may result in unstable output, bad dimensions, excessive waste, and increased running cost. Before purchasing a machine, it is necessary to compare machine capacity, screw, temperature controls, and post-machine operations. The table below provides you with key machine specifications that you should consider.
Key variables | Extrusion specifications |
| Production capacity | 80–800 kg/h, depending on pipe diameter and composition |
| Pipe diameter range | 16–630 mm, depending on machine configuration |
| Processing temperature | It ranges between 170–200°C, depending on formulation |
| Screw diameter | Approximately 51-110 mm, larger diameter allows for higher material input. |
| Type of extruder | Conical or parallel twin-screw extruder, selected according to the pipe size and output. |
| Screw length-to-diameter ratio (L/D) | Normally about 18:1-25:1, depending on the PVC formulation. |
| Vacuum calibration system | Stainless steel tank with adjustable vacuum and circulating cooling water |
| Haul-off system | Caterpillar or belt haul-off with variable speed control to ensure pipe steady movement. |
| Main motor power | Approximately 18.5–172 kW, depending on output requirements |
| Control system | PLC with touchscreen HMI for process monitoring and coordination. |
| Cutting system | Synchronized cutter producing pipes of accurate length without interfering with the extrusion process. |
| Die head type | Annular die for pipe production, sized according to the diameter and wall thickness. |
How a PVC Pipe Extrusion Machine Works

PVC dry blend or appropriate compound is added into the extruder via the controlled feeding process. The twin screws rotate, knead, compress, and plasticize the material while controlled heating ensures proper melting of the material. Proper control is important because high temperature and residence time may degrade the PVC material.
After getting the uniform melt, the screw forces the material through an annular die that has your required size of the pipe. The heated pipe then moves to a vacuum calibration tank where controlled vacuum pressure keeps the outside diameter of the pipe against the sizing sleeve. The pipe is cooled while moving to maintain its dimensions.
After the calibration process, the haul-off pulls the pipe at controlled speeds through the cooling zone. The cutter cuts it into your desired length while the stacker stacks the pipe for further processing. In case your application needs socket joints, you can use a belling machine without the need for socket inserts.
How PVC Material Affects Extruder Selection

Unlike many other thermoplastics, PVC requires careful processing due to heat sensitivity, which may lead to material degradation. For this reason, your extruder should have controlled temperatures, appropriate screw configuration, and enough mixing for effective fusion. Conical twin-screw extruders are usually appropriate for the production of rigid PVC pipes as they ensure proper feeding, mixing, and politicization.
Physical properties of PVC material determines the choice of the feeding system. Dry-blend PVC powder requires controlled feeding since it has different bulk density and flow properties than PVC compound pellets. You can prevent feeding issues, unstable production, and additional modifications by checking your formulation prior to placing an order.
Moreover, different additives can influence the performance of PVC material in extrusion equipment. Fillers, stabilizers, lubricants, pigments, and impact modifiers can influence torque, fusion, melting, and process conditions. A cheap extruder becomes costly if poor material handling leads to high scrap levels, inconsistent production, and constant cleanings.
How to Maintain Consistent PVC Pipe Dimensions

First, ensure your tooling is well matched as both the die and the calibration sleeve determine your final dimensions. Align the die properly and ensure uniform temperatures across the extrusion zones to avoid uneven melt flow. Stable melt pressure also helps in keeping a consistent wall thickness even in long production runs.
The vacuum calibration system controls the pipe’s exterior dimensions as the material cools down. The vacuum, water flow, and cooling temperature should be constant since variations may affect the diameter, roundness, and quality of the surface. The speed of your haul-off should correspond to the extrusion rate since too much pulling will lead to thinning of the pipe wall.
Performing regular dimensional inspection will enable you detect any possible problems and make sure that your pipes are within dimension specifications. Inspect the diameter, wall thickness, ovality, and pipe length, and compare them against the relevant standards of the product. In cases of high-volume production, continuous ultrasonic measurement of the wall can help but is expensive and more complex.
FAQs

What causes rough surfaces on extruded PVC pipes?
Roughness may be caused by damaged tooling, incorrect processing, poor fusion or unstable temperature. Inspect your material, temperature profile, die, and melt stability before modifying your formulation.
What is the purpose of belling PVC pipes?
Belling creates a socket at the end of a pipe so that sections may connect with compatible fittings or sealing rings. This feature makes installation easy as there is no need for separate sockets.
What is the difference between PVC, UPVC, and CPVC pipe extrusion?
PVC is the main material, and UPVC is typically defined as rigid PVC which doesn’t contain any plasticizers. CPVC, on the other hand, has higher level of chlorine than PVC and therefore requires appropriate processing conditions.
Can a PVC pipe extrusion machine process both powder and granules?
Yes, but your feeding system and screw design have to be compatible with the material and its formulation. Always ensure that your machine meets these criteria prior to the purchase as feeding differs for powders and granules.
How do you prevent PVC material degradation during extrusion?
You should ensure that the temperature, residence time and shear rate of the processing are within the recommended range for your formulation. Stable feeding and temperature control help to prevent overheating and discoloration.







